The Fishing Rod

Basically a fishing rod is a stick. To be more precise it’s a flexible shaft, usually fitted with runners or guides to carry the fishing line, and has a place to mount a reel. Fishing rods offer all sorts of advantages over handlines. Using a rod allows you to cast further and to reach out beyond bank-side obstructions like bushes and rocks, a rod will also keep your line away from the side of a boat or away from jetty pylons etc.

A Rod makes very useful bite indicators and shock absorbers when hooking, reeling and landing fish. Although the rod must suit the type of fishing you are doing, with so many different rods available on the market it can be a hard task choosing which rod best suits your needs. What rod you need depends on where you fish and what types of fish you are fishing for. You may need several rods and reel combination’s to get the most out of your fishing. When choosing a rod there are several things you need to take into consideration.

Rod configuration – There are three specific locations a reel can be mounted on a rod. Low mounts are for side cast reels, medium mounts are for threadlines and high mounts are for revolving drum type reels. The three mounting locations will provide a more energy efficient casting position.

Taper – The taper of a rod is the narrowing of thickness from the thick butt through to the thin tip. Most rods are built of hollow shafts called blanks. They can be made from fiberglass and graphite or a mixture of both. Rods are very light depending on what it is made from and although they are very strong and flexible they can break so you do need to be careful when your rod is under extreme pressure. Slow tapered rods are generally used in floating fish. Medium taper rods are very good for baiting fish. Fast taper rods are used when casting a distance.

Hands – There is either One Handed rods or double handed rods. Most light threadlines and baitcasters are single handed rods, where you only use one hand when casting. These rods are mostly used in estuary and freshwater fishing. Larger threadlines and medium size revolving drum reels are double handed rods, where you use two hands in the casting process. Double handed rods usually allow more power when casting and more leverage when fighting a tough fish. These make prefect sea fishing rods.

Keep these things in mind for the next time you are look to up date you rod or perhaps you are looking to take up fishing as a new hobby. There is no better way than to spend the day out on the ocean, on the beach of by the river just fishing.

Bobby Gillies keen fishermen and host of http://www.bigfishbobby.com specializing in Surf and Sea Fishing Rods.

Protecting Your Knives

A good knife is an investment. A well-made blade, if properly cared for, can last a lifetime. People like chefs, who earn their living with a knife, they spend large amounts of money to pay particular attention to their tools. Unfortunately, many people do not know how to properly handle a knife. If everyone just follow some simple maintenance habits, they’d never make a dull blade or cut again.

Always regularly clean the knife. Make them dirty after using only accelerate the possibility of corrosion. Do not wash the blade until you need to use it again can cause stains and rust to accumulate between intervals of use. Immediately wash and dry the knife will only be five minutes at the most, but the benefits are immeasurable.

Remember the three S: sharpen, strop and steel. It ‘a mistake to sharpen the knife every day. Faulty or over-sharpening of the blade can break very quickly. When you need a quick touch-up required, stropping the knife with a leather strap is quite often. The skin gently rearranges the indentations and microscopic teeth along the edge thereby restoring the cutting capacity. Steal with a metal bar will have a lot to achieve the same with the added benefit of removing torn off or damaged particles.

If you are going to place your knife for a long time deposit, to bring a little ‘oil and wax along the blade first. These two things serve as metal layers of protection against rust and corrosion. The oil is especially effective with pocket and utility knives that have moving parts and are bent downward; We’ll keep the joint moving smoothly and cleanly. The wax can also keep handles from crumbling and decaying.

For anything other than kitchen knives, you can also consider the application on a permanent basis one of the first liquid ceramic protective metal coatings on the market. These offer considerable amount of protection against impact, heat, abrasion and complete invulnerability against all types of rust and corrosion. These characteristics would be invaluable in a hunter are all-purpose blade or blades in the battle of the military.

A great thing about these designer protective metal coatings is that they are effective is matched only by putting their accessibility and easy. A bottle is usually less than fifteen dollars and anyone even have rudimentary skills syringe can apply the quick and safe treatment.

Visit www.KGCoatings.com for more information.

More articles Gerber Knives

Canadian Pike Fishing

If you have never been in one of those fishing trips or holidays Canadian pike was then just do not know what you’re missing. The outdoor Great Canadians, the Canadian Rockies, the wind blows and pike caught the monster on the auction (that would be great, right?) Well, this can be a reality, if you are a Canadian pike fishing trip. Let’s see what this means and what you need to start a trip of its kind to have.

Oh, fishing for pike Canadian! It ‘a great feeling as well have caught a pike in the barrel. And because of the power that this type of fish, you probably know when you have a pike at the end of your line and your whole boat will vibrate (do not worry, there is not registered any case of lost fishermen or men in sea ​​because of a pike, but who knows?).

The worst things for the pike is not the time you hear one of the bars, no. And ‘the time was by boat which is crucial and this is the time when you should be very careful or you risk losing the fish. These fish tend to run a lot and can also be rolled away your fish. In this case, in most cases, it should tie the line to the fish as there is probably no way that you can untangle’ll be there. There is also a fishing rod! Damn!

This is exactly why you should be very careful when landing a Canadian pike boat. It can be a fine fishing rod in seconds and the joy of catching a big fish that will be overlooked when throwing ruins become a good auction. But if you take the situation under control, you will end up with a fish and not “victims” on your part.

A good tip is to learn to distinguish the pike from its close cousin of the muskellunge, which is similar in appearance, but also has a couple of different things. Do a search for these two fish and see what one has and the other does not. This can help you with your Canadian pike fishing trip if you are able to know what you have to take will be in the bar and effectiveness.

Some good places to go to the Canadian pike fishing vacation Canada are Ontario and Manitoba. These places are some of the best fishing trips I’ve ever had to offer and is very likely to also take a little ‘fish, if at least a little’ informed on the type of fish in those waters and how to catch them live. So what are you waiting for? Start searching for the fishing trip of the Canadian pike and go live it!


To learn more about things like fishing pike fishing the Canadian or Canadian pike

Stainless Steel Trays

Normally in our daily routine we use different crockery such as pots, plates, containers, box and trays of different material, so lets talk about stainless steel trays that we use daily in kitchen, dining table, and etc. right from food preparation to cooking and serving the stainless steel trays at each step prove to be very useful. The thin and flat stainless steel trays are mostly use for serving food or some time used for transferring other containers from one place to other such as from kitchen to dining table. The stainless steel trays have different attributes of beauty or simplicity. These attributes are as follows: size, shape, design and finishing etc
Advantages of Stainless Steel Trays

As we all know that stainless steel trays are most commonly used in our home daily, so there are the number of advantages and uses of stainless steel trays. The trays that are made up stainless steel are highly corrosion resistant and are used to create number of size and shapes. The stainless steel trays have long life time as they do not corrupted soon, its one other important advantage is that is does not rust due to its quality that it is the resistant to stain food and water. Stainless steel trays are not only rust proof but also scratch proof. These are also heat-proof and freeze-proof which will not melt and warp in the oven and will not crack in refrigerator or the freezer. The stainless steel trays are durable like other containers of stainless steel to withstand almost any work condition inside or outside the kitchen.
Types of Stainless Steel Trays

Stainless steel trays are used for the various tasks, they are of different size and shapes but some are for defined tasks. There are the three major types of stainless steel trays. These are as follows: the baking tray that is used to bake anything in oven such as cake, biscuits etc. the roasting trays that are used to make roast in oven or sometimes in pressure cooker, and the last and most common type of stainless steel trays is serving tray that is used to take thing from kitchen to dinning, for serving food, and etc.
Designs, shapes, sizes and finishing of the stainless steel trays

Stainless steel trays are attainable in numerous designs, shapes, sizes, pattern, and etc. you should consider these entire things when you buy the stainless steel things, steel mostly in its on color i.e. silver, thats why there is no color verity for stainless steel trays but off course there are number of designs in stainless steel trays. The finishing of stainless steel trays is the best in all kind of trays such as wooden, plastic, and etc. stainless steel trays mostly in two to three shapes i.e. round, rectangular, square. But most commonly demanded shape of stainless steel trays are rectangular shape

Interested in learning more? Read more detailed writings about Stainless Steel Trays right now. Visit our site for lots of great Wooden Bed Tray Information.

More Stainless Steel Knife Articles